When I'm playing a banjo with a Standard 5/8 bridge I have handy a 9/16 which is slightly lower and the 21/32 … The tighter the head, the higher the bridge will sit, and the higher your banjo… Banjolele Bridge Placement. The intonation is improved by having the bridge in what is called the “sweet spot” on the banjo head. Banjo action should always be set up or adjusted after the correct head tension is achieved. Place the bridge … Figure out which end of the bridge needs to go under the skinny strings, put the bridge under the strings, and start tightening the strings until the bridge … by Ben Freed ... To see if the neck is straight or bowed, sight down the neck from the nut to the bridge (with the strings tuned up to pitch), sort of like sighting down the … Adjusting the head tension will affect how high the bridge sits, and will, therefore, affect your action. Alrighty. Here is how you get it back in the proper spot: 1. Put the Bridge On and Tune the Banjo - On most six-string banjos the bridge should be between 12 1/4 and 13" from the twelfth fret. I don't like having to bring my banjo in for set up every time my action gets to low or too high. Standard Set-up … That will minimize bridge movement and keep tension on the neck. So the bridge is … Bridge placement is important to get the best sound out of your banjo. The above set-up procedure should be performed any time your banjo seems out-of-sorts in any way, and at least twice a year during the change of seasons (from summer to winter and vice-versa). Bluegrass Banjo Set-Up for Beginners. First, measure from the nut to the 12th fret: 2. Re: Setting up a Tenor Banjo bridge The reason for the compensation is that when you push a string down to the fret, you’re actually bending the string a bit, and that sharpens it a bit. So You have a banjolele (also called a Banjo Uke) that has a bridge that is not in the right place, or is detached completely. This is actually easy to do as a banjo has a floating bridge …